This is a set of full transfer keycaps that can be plugged into a mechanical keyboard.
You can print the desired image in full color on the front.
Design the R4 keycap, Space bar keycap, and Tincase, creating the perfect set.
The LED light from the keyboard is not transmitted.

• Keycap size
  R4 : 1.78 x 1.78 x 1.16 cm
  Space Bar : 12 x 1.9 x 1.2 cm
• Overall Size : 160 x 90 x 20 cm
• Material : PBT, Tin, High hardness sponge
• Country of Manufacture: Made in Korea

Notice

• Please check the production guide.
• The minimum printable line thickness is 0.2mm, and thinner designs may not be produced or may be omitted in part.
• Keycaps using OEM profiles.
• Available for cherry-like, SA profile keyboards, but interference with the substrate or other keys may occur.
• Due to the nature of printing, the design on the side is stretched and may come out lighter than the original color.
• The film may not fit up, down, left and right symmetries due to the stretch of film during printing, and there may be a difference of 0.5mm or less.
• Due to the nature of printing, please avoid designs with different background colors on the top and side as much as possible.
• Please note that some products may have fine scratches and spots due to the nature of the material, which is not a reason for defects.
• Due to the nature of printing, detailed expressions such as thin lines, small letters, gradations, and sophisticated 3D images are difficult to produce.
• Because the film stretches when printing, corners can be expressed finely brightly for dark background colors.
• Due to the printing nature of the tin case, the white image is not printed.
• Please be careful when using water, ethanol, acetone and hand sanitizer as long-term contact with the case, or excessive pressure with a wet tissue to wipe the case may smudge or peel off the printed area.

Pre-order Information

Keyboard Column Selection

• Prior to placing an order, kindly ensure to verify the column layout of your keyboard.
• Selecting an incorrect column layout could result in differences in height causing potential discomfort.

Compatibility of Keycaps

• The keycaps used are of the OEM profile.
• Before making a purchase, please check the coupling points on your keyboard. Keyboards without a cross-shaped (+) coupling might face usability challenges.