1. Select size

• Choose one of the S, M, or L sizes to begin creating your own stand design.

2. Upload Image File

• PNG image _ Please upload PNG images with not background.
• JPG image _ Please aware that JPG images will be printed with background.

3. Automatic cutting line

• Automatic cutting line _ When you upload an image, a 0.1inch cutting line margin will automatically be added to the edge of the image.
• Use cut path for delicate design _ For precise editing, edit the figure cut path directly.

4. Adjust the location of a support.

• A support's attachment point can be adjusted as you want.

5. Please check the image resolution.

• If you use an enlarged image with a low resolution, mosaic or blurring may occur during printing. (Basic requirements of image file : Resolution 300dpi or higher)

6. Due to the difference in color mode, the screen color and the actual product may be slightly different.

• The screen viewed on a monitor or smartphone is a digital color that represents the color of the web in RGB color.
• The color of the item is CMYK color, which is a printable color that represents the actual color when printing.
• Due to the difference between the two color modes, certain colors may look darker.

Acrylic Figure Editor Editor For experts

1. How to Submit Final Data File

• Please use the expert editor on your PC.
• Create a design in ai format and make your own stand. (The template can only be properly used in Adobe Illustrator 2021 or later versions.)
• The product will be manufactured based on the automatically generated mock up image after 'Design Upload.' Please confirm your design aligns with final mock up image.

2. Size

• The Artboard size cannot be expanded over 140 x 200mm.
• Please ensure that the design data, cutting lines, and the ring all fit within the Artboard size.

3. layer

• image Please upload the design data in PNG format with a transparent background.
• cut Please create an unbroken cutting line without interruptions. Provide a cutting line with a minimum +2mm margin around all sides of the design data.
• Please change the cutting line to a compound path. In Illustrator, right-click on the cutting line → Make Compound Path
• The design data size will be reflected in the production process 100%, so please work on it in the actual desired size.

4. Stand

• Printing is not available for the base of the stand.
• While the stand's width is adjustable, designing the base and the insert is not possible.
• Its position will automatically align with the bottom of the cutting line.
• The minimum width of the stand is 24mm, and if the width is set narrower than this, it will automatically be adjusted to the minimum width (24mm).

• If the width of the stand is set wider than the cutting line width, it will automatically be adjusted to match the maximum width of the cutting line.
• If the stand extends beyond the design data's cutting line on the left or right, it will automatically align with the maximum left or right of the cutting line.

5. Save

• When saving the file, be sure to save it in the SVG format.
• Path) File > Export > Export As > In the Format option at the bottom of the dialog, choose SVG (svg) > Check 'Use Artboards' > Click 'Export.'
• In the SVG Options dialog
  Images: 'Embed.'
  Object IDs: ‘Layer Names’
  Decimal: Enter ‘5’ > Uncheck 'Responsive.' > Click 'OK.'

Information about production

• In Marple, you can make any kind of item you want starting from one piece
• Since all processes are automated, we do not provide guidance for separate requests or corrections.
• Minor print color differences of the same image and a slight image shift about 0.1inch are not applicable to the refund policy.
• Exchanges and refunds are not possible after the product is shipped, so please check once more before ordering.
• If there is a problem with the product, please contact us by email(help@marpple.com) or customer service within 7 days of receipt.
• If you have any further questions, please contact us through 1:1 consultation and customer center.